Publications

• Purification and characterization of D-allulose 3-epimerase derived from Arthrobacter globiformis M30, a GRAS microorganism.

  Yoshihara A., Kozakai T., Shintani T., Matsutani R., Ohtani K., Iida T., Akimitsu K., Izumori K., Gullapalli P.K.

  An enzyme that catalyzes C-3 epimerization between d-fructose and d-allulose was found in Arthrobacter globiformis strain M30. Arthrobacter species have long been used in the food industry and are well-known for their high degree of safety. The enzyme was purified by ion exchange and hydrophobic i ... >> More

  An enzyme that catalyzes C-3 epimerization between d-fructose and d-allulose was found in Arthrobacter globiformis strain M30. Arthrobacter species have long been used in the food industry and are well-known for their high degree of safety. The enzyme was purified by ion exchange and hydrophobic interaction chromatographies and characterized as a d-allulose 3-epimerase (d-AE). The molecular weight of the purified enzyme was estimated to be 128 kDa with four identical subunits. The enzyme showed maximal activity and thermostability in the presence of Mg²⁺. The optimal pH and temperature for enzymatic activity were 7.0-8.0 and 70°C, respectively. The enzyme was immobilized to ion exchange resin whereupon it was stable for longer periods than the free enzyme when stored at below 10°C. In the column reaction, the enzyme activity also maintained stability for more than 4 months. Under these conditions, 215 kg of d-allulose produced per liter immobilized enzyme, and this was the highest production yield of d-allulose reported so far. These highly stable properties suggest that this enzyme represents an ideal candidate for the industrial production of d-allulose. << Less

  J. Biosci. Bioeng. 123:170-176(2017) [PubMed] [EuropePMC]

  This publication is cited by 3 other entries.

• Directed divergent evolution of a thermostable D-tagatose epimerase towards improved activity for two hexose substrates.

  Bosshart A., Hee C.S., Bechtold M., Schirmer T., Panke S.

  Functional promiscuity of enzymes can often be harnessed as the starting point for the directed evolution of novel biocatalysts. Here we describe the divergent morphing of an engineered thermostable variant (Var8) of a promiscuous D-tagatose epimerase (DTE) into two efficient catalysts for the C3 ... >> More

  Functional promiscuity of enzymes can often be harnessed as the starting point for the directed evolution of novel biocatalysts. Here we describe the divergent morphing of an engineered thermostable variant (Var8) of a promiscuous D-tagatose epimerase (DTE) into two efficient catalysts for the C3 epimerization of D-fructose to D-psicose and of L-sorbose to L-tagatose. Iterative single-site randomization and screening of 48 residues in the first and second shells around the substrate-binding site of Var8 yielded the eight-site mutant IDF8 (ninefold improved kcat for the epimerization of D-fructose) and the six-site mutant ILS6 (14-fold improved epimerization of L-sorbose), compared to Var8. Structure analysis of IDF8 revealed a charged patch at the entrance of its active site; this presumably facilitates entry of the polar substrate. The improvement in catalytic activity of variant ILS6 is thought to relate to subtle changes in the hydration of the bound substrate. The structures can now be used to select additional sites for further directed evolution of the ketohexose epimerase. << Less

  ChemBioChem 16:592-601(2015) [PubMed] [EuropePMC]

  This publication is cited by 1 other entry.

• Gene cloning and characterization of L-ribulose 3-epimerase from Mesorhizobium loti and its application to rare sugar production.

  Uechi K., Takata G., Fukai Y., Yoshihara A., Morimoto K.

  A gene encoding L-ribulose 3-epimerase (L-RE) from Mesorhizobium loti, an important enzyme for rare sugar production by the Izumoring strategy, was cloned and overexpressed. The enzyme showed highest activity toward L-ribulose (230 U/mg) among keto-pentoses and keto-hexoses. This is the first repo ... >> More

  A gene encoding L-ribulose 3-epimerase (L-RE) from Mesorhizobium loti, an important enzyme for rare sugar production by the Izumoring strategy, was cloned and overexpressed. The enzyme showed highest activity toward L-ribulose (230 U/mg) among keto-pentoses and keto-hexoses. This is the first report on a ketose 3-epimerase showing highest activity toward keto-pentose. The optimum enzyme reaction conditions for L-RE were determined to be sodium phosphate buffer (pH 8.0) at 60 °C. The enzyme showed of higher maximum reaction a rate (416 U/mg) and catalytic efficiency (43 M(-1) min(-1)) for L-ribulose than other known ketose 3-epimerases. It was able to produce L-xylulose efficiently from ribitol in two-step reactions. In the end, 7.2 g of L-xylulose was obtained from 20 g of ribitol via L-ribulose at a yield of 36%. << Less

  Biosci. Biotechnol. Biochem. 77:511-515(2013) [PubMed] [EuropePMC]

  This publication is cited by 3 other entries.

• Crystal structures of D-tagatose 3-epimerase from Pseudomonas cichorii and its complexes with D-tagatose and D-fructose.

  Yoshida H., Yamada M., Nishitani T., Takada G., Izumori K., Kamitori S.

  Pseudomonas cichoriiid-tagatose 3-epimerase (P. cichoriid-TE) can efficiently catalyze the epimerization of not only d-tagatose to d-sorbose, but also d-fructose to d-psicose, and is used for the production of d-psicose from d-fructose. The crystal structures of P. cichoriid-TE alone and in comple ... >> More

  Pseudomonas cichoriiid-tagatose 3-epimerase (P. cichoriid-TE) can efficiently catalyze the epimerization of not only d-tagatose to d-sorbose, but also d-fructose to d-psicose, and is used for the production of d-psicose from d-fructose. The crystal structures of P. cichoriid-TE alone and in complexes with d-tagatose and d-fructose were determined at resolutions of 1.79, 2.28, and 2.06 A, respectively. A subunit of P. cichoriid-TE adopts a (beta/alpha)(8) barrel structure, and a metal ion (Mn(2+)) found in the active site is coordinated by Glu152, Asp185, His211, and Glu246 at the end of the beta-barrel. P. cichoriid-TE forms a stable dimer to give a favorable accessible surface for substrate binding on the front side of the dimer. The simulated omit map indicates that O2 and O3 of d-tagatose and/or d-fructose coordinate Mn(2+), and that C3-O3 is located between carboxyl groups of Glu152 and Glu246, supporting the previously proposed mechanism of deprotonation/protonation at C3 by two Glu residues. Although the electron density is poor at the 4-, 5-, and 6-positions of the substrates, substrate-enzyme interactions can be deduced from the significant electron density at O6. The O6 possibly interacts with Cys66 via hydrogen bonding, whereas O4 and O5 in d-tagatose and O4 in d-fructose do not undergo hydrogen bonding to the enzyme and are in a hydrophobic environment created by Phe7, Trp15, Trp113, and Phe248. Due to the lack of specific interactions between the enzyme and its substrates at the 4- and 5-positions, P. cichoriid-TE loosely recognizes substrates in this region, allowing it to efficiently catalyze the epimerization of d-tagatose and d-fructose (C4 epimer of d-tagatose) as well. Furthermore, a C3-O3 proton-exchange mechanism for P. cichoriid-TE is suggested by X-ray structural analysis, providing a clear explanation for the regulation of the ionization state of Glu152 and Glu246. << Less

  J. Mol. Biol. 374:443-453(2007) [PubMed] [EuropePMC]

  This publication is cited by 1 other entry.

• Characterization of D-tagatose-3-epimerase from Rhodobacter sphaeroides that converts D-fructose into D-psicose.

  Zhang L., Mu W., Jiang B., Zhang T.

  A non-characterized gene, previously proposed as the D-tagatose-3-epimerase gene from Rhodobacter sphaeroides, was cloned and expressed in Escherichia coli. Its molecular mass was estimated to be 64 kDa with two identical subunits. The enzyme specificity was highest with D-fructose and decreased f ... >> More

  A non-characterized gene, previously proposed as the D-tagatose-3-epimerase gene from Rhodobacter sphaeroides, was cloned and expressed in Escherichia coli. Its molecular mass was estimated to be 64 kDa with two identical subunits. The enzyme specificity was highest with D-fructose and decreased for other substrates in the order: D-tagatose, D-psicose, D-ribulose, D-xylulose and D-sorbose. Its activity was maximal at pH 9 and 40 degrees C while being enhanced by Mn(2+). At pH 9 and 40 degrees C, 118 g D-psicose l(-1) was produced from 700 g D-fructose l(-1) after 3 h. << Less

  Biotechnol. Lett. 31:857-862(2009) [PubMed] [EuropePMC]

  This publication is cited by 2 other entries.